Assembly & care
A few easy minutes.
Your NOL arrives with the Skin and pre-filled Core packed separately inside one box. Bring them together like a pillowcase, then give each part the care it needs.
See it, then do it
Four quiet steps.
Each clip loops the exact movement, so you can follow along without replaying the full video.
01 — Meet your Skin & Core
Open the main box and take out the separately packed Skin. Inside, you’ll also find the compressed Core protected in its brown fabric bag.
02 — Fluff, rest & connect
Remove the Core from its fabric bag, fluff it like a pillow and let it expand for 30–60 minutes. Turn the Skin inside out, find the detachable zipper at the bottom and connect it to the Core.
Tip: The zipper is inside the Skin, on the side opposite the velcro.
03 — Pull the Skin into place
Turn the Skin right-side out as you pull it over the Core. Work upwards gradually, tucking the Core inside as you go.
Tip: Match the corners first, then pull the Skin up—much like putting on a sock.
04 — Close
Tuck the Core fully inside, align the opening and secure both the velcro and zipper. Give your NOL a final shape.
Make it yours
Shape it around you.
Move more foam towards the taller end for back support. Press the centre down for a deeper seat and let the sides rise naturally.
Corners and against the wall gives you much better back-support. There is no single perfect shape. Adjust it until it feels like yours.
Living with your NOL
Two parts. Two kinds of care.
01 / Skin
The part you can wash.
The Skin is the removable outer cover—the colour, texture and character of your NOL.
Remove it from the Core before cleaning.
Follow the care label for its specific fabric.
Wash separately with a gentle detergent.
Close the zipper and velcro before washing.
Let it dry completely before fitting it again.
02 / Core
The comfort that stays dry.
The Core is the inner liner, already filled with shredded PU foam.
Do not wash or soak the filled Core.
Keep it away from rain, moisture and liquids.
Lightly spot-clean the liner only when needed.
Let the area dry fully before replacing the Skin.
Fluff it occasionally to redistribute the foam.
Every few weeks
A little fluff goes a long way.
Shredded PU foam naturally settles with use. Place your NOL on its side, press and roll the Core gently, then stand it upright and move the foam back towards the taller end.
Good to know
You may be wondering
Why does my Core look flat after unpacking?
The Core is compressed for easier shipping, so it may look flatter than expected when first opened. Fluff it generously and leave it uncovered for 30–60 minutes while the shredded foam expands and air moves back inside.
Why isn’t the Core filling the Skin properly?
The foam may not have finished expanding before the Skin was fitted. Remove the Skin, fluff the Core again and let it reach at least 90% of its full shape before refitting the Skin.
Can I fit the Skin immediately after unpacking the Core?
We recommend waiting for about an hour. Leaving the Core uncovered allows better airflow, helping the compressed foam loosen and expand faster. Once it feels fuller and more evenly distributed, you can fit the Skin.
Why does my bean bag look more like a bed?
This usually happens when the Core has not fully expanded or the foam has not been shaped towards the taller end. Let it expand completely, then stand your NOL upright and move more foam towards the back to create its supportive pyramid shape.
Will the Core settle or become flatter with use?
Yes. Shredded PU foam naturally settles and softens with regular use. This is normal and does not necessarily mean that the foam has been damaged or lost.
How do I bring back its shape?
Place your NOL on its side, press and roll it gently to loosen the foam, then give it a generous fluff. Stand it upright and move more foam towards the taller end for stronger back support.
How often should I fluff my NOL?
Fluff it whenever the seat begins to feel uneven or less supportive. A quick reshaping every few weeks helps redistribute the foam and keeps your NOL feeling balanced.
What is the best way to sit on my NOL?
There are two comfortable ways to use it:
- Keep the black loop behind your head for a taller seat with more upright back support.
- Turn the black loop towards the front, beneath your knees, for a lower and more relaxed lounging position.
Switching between the two positions occasionally also helps redistribute the foam and lets you find the comfort that suits the moment.